gBodyParts Ignition Module

[BenPutnam]

I'm in the process of replacing every electrical part on my car to find my high boost popping and missing problem and I'm at the ignition module now. I need something that can stand up to ~25lbs of boost. Whatever is wrong with the car now shows it's self around 15-17lbs of boost.

Does anybody have any experience with the gBodyParts ignition module?

 

[87NAT]

For whats it worth I had the same issue at one time. Changed everything (sensors, modules, etc...)and it turned out to be a worn stock cam with one lobe that was really worse than all the others.

 

[MikeL.]

+1 and as the lobe wears more and more, you'll see the popping starting to occur ealier. Mine started at 16 then worked it's way down from there.

 

[BenPutnam]

What would the cam lobes have to do with it?

 

[ryan george]

also check glen at ***********. he's a great guy, supplies quality parts, and will stand behind his parts. i've used glen several times and he's always gone way above and beyond.

 

[MikeL.]

IIRC as the lobe wears more and more, the exhaust valve (#3 in my case) opens less and less so under boost it causes reversion and pops back up through the intake. You wouldn't believe the trash I found on my oil pickup from the toasted lobe. If funds allow, go with a roller setup.

 

[BenPutnam]

I think it's popping out the exhaust.

 

[87NAT]

I think it's popping out the exhaust.

Mine was popping out the exhaust also. +2 on the roller. Do it once, do it right.

 

[BenPutnam]

I wouldn't think it's a mechanical problem because it doesn't do it if I put it in batch fire mode (unplug the cam sensor).