Updated List And Other Important Info
Gang,
I appreciate your zeal in trying to snap up these parts but if you could do a couple of things for me it would really help keep it organized so I can be sure everyone gets the correct items and noone gets "skipped over" in line for a part.
**Shoot me a PM about the parts you're interested in.
**If you want to pay via PayPal add 2.9% for PayPal's fees.
my PayPal address is
bigoilman@yahoo.com
**I've posted pictures of a lot of the stuff here:
If you don't see a pic of your item, let me know and I'll add it to that album rather than sending multiple e-mailed photos to people.
I'll leave items that have been claimed on the "For Sale" list until I receive payment for them.
Thanks again, guys. It's killing me to sell all this stuff but you gotta do what ya gotta do.
Here's the updated list:
2 109 blocks (one standard, one .030 over) $300 and $100 respectively
2 turbo cranks $125 each
Champion Iron heads (1 is brand new, never run) - $700
9" K&N filter with polished MAF pipe (shine is NOT good) - $10
Stock Upper Plenum - $30
Spearco Intercooler (the kind they put in the hot-air conversion kits) - $100
3.5" MAF and MAF Translator - $150 Pending
JE FORGED PISTONS w/Rings - I don't remember what size and I can't find any markings to tell me- $300
.030 Forged Pistons (TRWs) on 2 dot rods - $100 (these got dinged in shipping a little bit I can send some close-up pics)
5 – stock Buick TR pistons and 2 dot rods - $75
Gauge pod single for A-Pillar $ - 15
ECM - $75
Powder coated relay bracket (the one that goes on the firewall) - $15
ATR PITBULL chip for #52 injectors - $25
Casper's Electronics LC2 wiring harness for hybrid/race installations - $375
Ported stock intake - $250
TCI 2004R tranny - $400
12" 2800 stall convertor - $150
Stock Fuel rail - $25
Adj. FPR (billet top, Bosch 233 bottom) - $65
Crank Sensor - $20
Cam Sensor - $40
Stock up pipe - $15
3” SS Downpipe (parts) This is a 3” BGC DP w/o the elbow. Great for building your own DP - $100
Ported Stock DP elbow - $25
Stock DP - $15
Stock Crossover pipe with Deltagate flange - $10
3” “Stubby” DP elbow with wastegate - $100
Front engine cover - $25
P/S Pump and pulley - $30
Stock Headers – w/crossover - $100
Turbo mounting bracket - $40
Starter - $10
Flex Plate - $20
Red's XP fuel pump - $35 (I called RA and this pump was built pre-1997. It's been on my shelf since about 2000)
Billet main caps (centers)– $100
Stock I/C fan - $20
Oil Pan - $35
Coilpack and ignition module - $100
Billet aluminum vacuum block for vacuum brake conversion - $20
Autometer Pro-Comp Ultra-lite gauges - $350 (will not part out at this time)
3-3/8” Speedo
3-3/8” Tach
2-5/8” H20 Temp
2-5/8” Oil Pressure
2-5/8” Volt Meter
2-5/8” Fuel Level
Racetronix Dual Fan harness NEW – $50
Turbolink software v.2.1 – $50
Casper’s Cam sensor tool – $20