GN stock wheel bs

[neogeo87]

I sold my stock 87 GN wheels and would like to know the factory back spacing on this wheel.

 

[grocerygetter]

I always looked at gbodyparts.com in the wheels section (7"wide)...my cheat sheet .

 

[49-blues]

Stock = 4" BS.

 

[neogeo87]

stock wheels bs

Thanks for the replies

 

[FBSideoiler427]

If somebody has their stock wheels off the car, can you measure the actual width of the wheel, outer lip to outer lip and please post? Is the wheel 7" wide or is 8" wide.

A general rule has always been that a 15 x 7" wheel is really 8" wide due to the assumed 1/2" offset per side required for tire seating.

Thanks,

 

[grocerygetter]

8" outside edge of rim-lip to outside edge of rim-lip.

 

[turborob]

8" outside edge of rim-lip to outside edge of rim-lip.

john i did not know you had the factory rims for your car. i thought you had aftermarket. i just pulled mine off so i will measure them as well.

 

[grocerygetter]

yeah I got the factories in the shop here at work...got them with the car...it just had the AREs on it when I got it from Jim.