GN1 Perf. SS 4-bolt headers & Q-trim 4 bolt exhaust housing

[ghall]

I have a set of BRAND new SS headers--4 bolt w/ gaskets. These headers are brand new. I milled the header flange for 14 bolt aluminum GN heads--if you have 8 bolt heads, you can't tell once they have been installed--if you have 14 bolt heads, i saved you the trouble. They come with everything pictured--i even have the original box they were shipped to me in.

I also have a tangential .81 4-bolt exhaust housing--freshly grit-blasted and ready to go. Fits original Q-trim wheels, not gtq or hpq.

Price of the headers is $525
Price of exhaust housing is $120

Thanks,

Geoff

 

[gnpoweredrail]

I would love to have these headers!!

 

[slamming 6]

Are they dubble wall on the slip joint and v-band connections.

 

[L8TRH8R]

How much?

 

[ghall]

Are they dubble wall on the slip joint and v-band connections.

Not really sure what you are asking. You can see the slip joint and v-band's in the photos--if you want any close up photos--just let me know.

Price again is $525/headers
and $120 for the exhaust housing.


Geoff

 

[ghall]

Ttt

 

[TYRFRYR]

Sent you PM. Very interested. Who made these?

Thanks,

Tyson

 

[87action]

.81 turbine housing

Is that a garret v-band housing, what size is the q-trim wheel? My exducer is 68mm and inducer is78mm.

 

[ghall]

Is that a garret v-band housing, what size is the q-trim wheel? My exducer is 68mm and inducer is78mm.

I called my buddy who is a precision/garret dealer. According to him, it is a garret housing that will fit your application according to the measurements i took of the housing. If you are interested in the housing, i will send it to you and you can make sure it fits what you have, if not just send it back to me,

Geoff

 

[ghall]

Headers are sold.
Exhaust house pending,

Thanks,


Geoff

 

[87action]

exhaust housing

Received housing, looks very nice. Will check measurements in the A.M. Thanks

 

[87action]

turbine housing A/R.81

All measurements look almost identical to older on-center housing.81, except where I can drop in the center housing to bolt up is not as snug as the older one. Both housings are very clean.