You can type here any text you want

go fast parts

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

steve hughes

Well-Known Member
Joined
Jul 5, 2002
Messages
1,026
10 bolt 8.5" 1350 series rear end yoke $80.00
10 bolt 8.5" 30 spline spool $100.00
10 bolt 8.5" TA rear end cover girdle $100.00
10 bolt 8.5" 30 spline Moser axles with Strange c-clip eliminators and 5/8" drive studs . axles are starting to twist at the splines. I would not recomend for a 9 second car witha transbrake. $ 150.00
all these parts are used

9" ford 35 spline detroit locker used 6 passes $400.00

Aerospace rear disc brake kit for stock 8.5" rear .Holes in rotor hats have been drilled out for 5/8" studs. Used two seasons. $350.00

power plate for stock plenum $25.00
braided stainless steel front brake lines used $25.00
egt meter omega HH501A used $80.00
billet super servo for 200r4 trans used $50.00
charchol canister $20.00
canister relocator bracket $20.00
pinion snubber used $10.00
polished stock up pipe has some scratches and also 2 bungs for alky or whatever $25.00
used stock shifter cable $20.00
VDO 2 1/16" 80 psi electric oil pressure guage $30.00
VDO 2 1/16" 30 psi boost guage paint chipped on bezel used $20.00

aluminum head clamps modified for ATR headers used $125.00
Bradco bolt together 400 turbo torque convertor $600.00
2 Weld Draglite wheels 15 x 10 5.5" back space , drilled for rim screws, used but nice condition $350.00

ATR 3" external wastegate down pipe ,has a large ding in the side from hitting travel limiter on control arm, had to be slightly dinged on header side for clearance, has 2 O2 sensor bungs welded in, was polished to a mirror shine but needs touched up. $400.00

ATR 3" dump pipe stainless was polished to mirror finish but needs a little touch up $100.00

fabricated sheet aluminum 14 bolt oil pan set up for external pickup. The weldeds on this pan are a little ruff looking and could use a good welder to go over them to make it nice. $200.00


All parts are plus shipping from 45335 zip. I can do paypal only from a bank account not from a credit card. Otherwise a money order will do. Thanks for looking.

Pictures are on the photobucket site at the bottom in the parts for sale album.
 
rear end cover

Got pics of rear end cover? If its in perfect condition I'll take it.
 
Hey Steve, I'll take the TA rear end cover if Jdub doesn't want it. Thanks,
 
rear end cover

I hate saying stuff like that it sounds so snobish. Sorry again.
 
Pics are on the photobucket site at the end of my post. It has some burrs on the bottom from the floor jack.
 
I'll take the servo, the brake lines and the shifter cable.

PM me shipping info and Paypal info.

Shipping is to Long Island, NY 11741

Thanks

Mike Washington
 
Interested in Aerospace Brakes, 1350 yoke and snubber. Won't be back in town for a week, so I'll have to get into line then.
Thanks,
DGC
 
RJC Power Plate

power plate for stock plenum $25.00

I'll take this.... it is genuine RJC, right? If so, don't see how I can go wrong here! :smile:

Gonna' need an address.... my paypal is linked to my CC..... I'll Pm ya'...
 
Interested in the canister relocation bracket, as the cannister in my newly-aquired GN is just flopping around not bolted down.

How/where does this mount? Please put me in-line for it pending an answer to my question from somebody :)

Thanks!
John
 
I can't tell you exactly where it mounts John i never actually used it. I think it was made by ATR. I think it either bolts to the inner fender or core suport. Maybe one of the members here can help with this question.
 
Please retract my offer for the cannister bracket. I did some searching and found out that I can remove the cannister altogether with no problems.

Sorry- Good luck with your sale!
John

Interested in the canister relocation bracket, as the cannister in my newly-aquired GN is just flopping around not bolted down.

How/where does this mount? Please put me in-line for it pending an answer to my question from somebody :)

Thanks!
John
 
Back
Top