Going to the track today!!!

[87we410877]

Im going to the track in 4 hours with the new motor. Wish me luck!!!! Atco by the way. saturday 11/18/06

 

[441120]

Good luck

Good luck!
Post some times. Isn't Englishtown closer than Atco?
Let us know how the new engine runs.

 

[Quick6'n'-K.C.]

Today is the 19th, how did it go??

BW

 

[87we410877]

We'll, Jack did some tunning but we didnt get to do any data logging. We did a basic tune at idle. I had a new boost controller on the car and didnt know where the setting were so i adjusted it all the way out to be on the safe side. A guy wrecked into the wall which took up 2 1/2 hours and then test and tune class was only called one more time after that. So, i only got to run once. Brakes wouldnt hold the car at the line so i had to launch on 0 lbs on street tires. Once i got going boost maxed out at 5-6 lbs. I drove the entire track with my leg on the steering wheel and both hands in the center consol trying to turn the boost up. I managed to get it to start moving up in the middle of third gear and when i got to 15 lbs, saw the traps go by. So, most of the run was done at 6 lbs. I ran a 12.82 at 114 with a 2.03 60'. I was suprised it was that good. Next time were going to have to do some serious tunning and work up to 30 lbs with my slicks and fix my brake problem.

 

[Quiky One]

Thats a good time for 6 lbs of boost. Nice combo you have there.

Jason

 

[441120]

Almost seems like you have to test and tune before you go to test and tune:biggrin: LOL
Good 6 psi run, 12.82 @ 114 steering with your knee, a carb guy would be hanging on for dear life.