good combo?

[jerritt]

okay well im planning on buying a motor from a board member with this done to it:
Eagle crank; Oliver rods; Diamond pistons; ARP everything; clevite bearings; RJC girdle; ported and polished irons with flow numbers like Champion (according to engine builder), port matched intake; Custom roller cam, morel lifters, KB roller rockers, ta performance balancer, new flexplate.
with this motor and these mods:
3in downpipe
60lb injectors with tt chip (93 oct)
scanmaster
ALKY
A1000 fuel pump
big mouth cold air kit
57mm percision ball bearing turbo

would this be enough to get a high 10s motor?
i know i would need a different convertor and trans to actually get 10s but im trying to build the motor first.
thanks for any help or input

 

[kidglok]

yes, the parts can handle 10's..

what turbo?

 

[jerritt]

all i know about the turbo is it is a 57mm ball bearing turbo made by precision............the motor was assembled by a guy named DeWayne McCaully at ICE machine shop in TN....anyone ever heard or had motor built by him? thanks again

 

[blackgn1]

I have heard of him. Think I had a phone conversation with him years ago. Don't have any other info than I have heard of him.