Guages question

[mr_85regal]

im gettin a guage pod w/ voltmeter, Temp, and oil pressure.... where do i go for the temp and oil pressure guage...its a mechanical oil press. Just wonderin so i can hook it up

 

[b4black]

The switch for the oil pressure idiot light is on the block, just above the oil filter adapter. Unscrew it, and either replace it with the gauge's fitting, or screw in a T (and use both the gauge fitting and the switch together).

For the coolant, remove the idiot light switch and replace it with the sensor. Make sure you do the light's switch and not the ECM's sensor.

Route the tubing and wires through the speedometer grommet.