Just a note of appreciation to Cal Hartline for the spot on startup program for the XFI system and providing the adaptor harnesses I was short. All of this and I did not happen to buy the system from him!! The car started right up as if it had already been running before. Also, would like to make mention that the 3.5 bar map purchased through him along with the calibration file was a breeze to install. No chances of hoses blowing off any more. Things are moving forward and will be shaking the car down soon.
Hartline Performance
- Thread starter S2V6RACER
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
- Joined
- May 27, 2001
- Messages
- 10,866
I will be calling him tomorrow to ask a couple questions.
Dusty Bradford
Well-Known Member
- Joined
- May 24, 2001
- Messages
- 5,802
We got another TSM car running last night that belongs to friend. It's been a long road after we hurt the motor last year in BG. It now has a new motor and Hartline tune in it. First major obstacle was the FAST box had went bad from a bad grounding problem. Since I bought the system from Cal he saved us a ton of money on the repair with his connections to the guys at FAST. Then last night I put his startup program in it but the car would not run. One call to Cal and we traced out a MAP wiring issue in just a few minutes. Car cranked right off and the start up program was so close I hardly had to change anything. With the program so close we're also looking to make some passes Friday night.
One other good point, I have been under the gun to get this project done as we have sold our home and the car needed to get out of there ASAP. I really appreciate the time Cal save me by walking me though calibrating the sensors. This was second nature to him, just goes to show how much experience he has with the new software and how much I need to learn about it.
Thanks Otto P. for all your help too.
Thanks Otto P. for all your help too.
Similar threads
