Head Porting

[deputydog]

Besides Champion….any cylinder head porters/shops that specialize or very familiar with the 8445 heads.

 

[BEATAV8]

Besides Champion….any cylinder head porters/shops that specialize or very familiar with the 8445 heads.

Any good machine shop with a flow bench and a talented machinist could do it. I use a local shop near me for all my stuff.

 

[Turbo6inKY]

Any good machine shop with a flow bench and a talented machinist could do it. I use a local shop near me for all my stuff.

It's getting hard. My guy retired and the youngin's don't want to deal with cast iron.

 

[chris romani]

I got mine done at Cerelli performance engines he has machined 100’s of 109 and stage motors for my builder.

 

[deputydog]

No luck beside Champion, many NA or NOS B9 guys dont want touch turbo 6 heads…may contact Duttweiller and see of he still has his guy doing them

 

[chris romani]

No luck beside Champion, many NA or NOS B9 guys dont want touch turbo 6 heads…may contact Duttweiller and see of he still has his guy doing them

No luck beside Champion, many NA or NOS B9 guys dont want touch turbo 6 heads…may contact Duttweiller and see of he still has his guy doing them

Where are you located I just told you a place that does it and will provide you with a flow sheet.They are in Patterson N.J. I am sure you can ship the heads to him.His name is Bill Cerelli.

 

[chris romani]

Where are you located I just told you a place that does it and will provide you with a flow sheet.They are in Patterson N.J. I am sure you can ship the heads to him.His name is Bill Cerelli.

 

[deputydog]

Michigan

 

[chris romani]

Ok bit far but I guess you could ship.He has done 2 motors for me and 100’s for my builder, very familiar with everything TurboBuick.My heads flow better than champion irons that he did and port matched the intake.

 

[1KWIKSIX]

Besides Champion….any cylinder head porters/shops that specialize or very familiar with the 8445 heads.

Joe Biucchi (JB Racing) in Montreal, Canada
Not sure if he’s still doing them , think he might be winding things down.
Here’s mine that he did a few years ago

 

[Mr.Spool]

Besides Champion….any cylinder head porters/shops that specialize or very familiar with the 8445 heads.

It would be a wise choice to send your heads out to be ported.
There are many porters out there that are reasonable and the irons can make alot of power on the right combo.

 

[GNVYUS 1]

David at headgames porting is a GN guy but gets a lot of big import jobs, he knows his stuff and has the data to back it up.

Headgames Motorworks

Headgames Motorworks

headgamesmotorworks.com