Headers, Pistons, Rods, Roller lifters, Valve Springs

[TurboJoe3.8]

1. Set of factory stock headers with crossover pipe. Driver side is welded. I had these on my car over 5 years with no problems, and went 11.70's with these and a ta49. $100 shipped in the lower 48.

2. Set of 6 used Federal Mogul .020 over hypereutetic pistons. $50 shipped in the lower 48.

3. Set of 6 used factory 2-dot rods. They have ARP bolts installed in them which are more than that new. $50 shipped in the lower 48.

4. Set of 12 used ATR/ Speed Pro hydraulic roller lifters. $120 shipped in the lower 48.

5. Set of 12 NEW Comp Cams 980 valve springs and used factory style retainers. $40 shipped in the lower 48.

Paypal add 3%- I will ship to Canada for extra fee.

Thanks, Joe

 

[bison]

Ill take the pistons if they are indeed factory and .020 over. I doubt they are hyper though. The stock ones are eutectic. If they are truly hypereutectic ill pass.

 

[TurboJoe3.8]

Ill take the pistons if they are indeed factory and .020 over. I doubt they are hyper though. The stock ones are eutectic. If they are truly hypereutectic ill pass.

Brian- I'm not really sure. These came with a shortblock That I purchased and that's what I was told. Is there a way I can find out?

 

[pacecarta]

three dimples they are federal mogul hypers

 

[TurboJoe3.8]

three dimples they are federal mogul hypers

Thanks for the help Paul. That clears it up! I will edit the post.

 

[pacecarta]

they work but i wouldnt run 10s on them
heres a listing off ebay for similar dimpled , under nylen brand
231 (3.8Liter) Buick Piston Set 1979-1988 For Turbo Eng | eBay

i think on the one you cleaned ,#3 piston .. you can see the same part # 1156P

 

[TurboJoe3.8]

they work but i wouldnt run 10s on them
heres a listing off ebay for similar dimpled , under nylen brand
231 (3.8Liter) Buick Piston Set 1979-1988 For Turbo Eng | eBay

i think on the one you cleaned ,#3 piston .. you can see the same part # 1156P

Thanks!

 

[pacecarta]

do they have steel supports inside like the OE piston?

 

[TurboJoe3.8]

1. Set of factory stock headers with crossover pipe. Driver side is welded. I had these on my car over 5 years with no problems, and went 11.70's with these and a ta49. $100 shipped in the lower 48.

2. Set of 6 used Federal Mogul .020 over hypereutetic pistons. $40 shipped in the lower 48.

3. Set of 6 used factory 2-dot rods. They have ARP bolts installed in them which are more than that new. $40 shipped in the lower 48.

4. Set of 12 used ATR/ Speed Pro hydraulic roller lifters. $120 shipped in the lower 48.- SOLD.

5. Set of 12 NEW Comp Cams 980 valve springs and used factory style retainers. $30 shipped in the lower 48.

Paypal add 3.5%- I will ship to Canada for extra fee.

Thanks, Joe

 

[dalton]

I'll take the rods and headers with crossoverpipe if still for sale.

 

[TurboTJT]

I'll take:
5. Set of 12 NEW Comp Cams 980 valve springs and used factory style retainers.

 

[TurboJoe3.8]

I'll take the rods and headers with crossoverpipe if still for sale.

pm sent.

 

[TurboJoe3.8]

I'll take:
5. Set of 12 NEW Comp Cams 980 valve springs and used factory style retainers.

pm sent

 

[TurboJoe3.8]

1. Set of factory stock headers with crossover pipe. Driver side is welded. I had these on my car over 5 years with no problems, and went 11.70's with these and a ta49. $100 shipped in the lower 48. SOLD!
2. Set of 6 used Federal Mogul .020 over hypereutetic pistons. $40 shipped in the lower 48.

3. Set of 6 used factory 2-dot rods. They have ARP bolts installed in them which are more than that new. $40 shipped in the lower 48. SOLD!

4. Set of 12 used ATR/ Speed Pro hydraulic roller lifters. $120 shipped in the lower 48.- SOLD.

5. Set of 12 NEW Comp Cams 980 valve springs and used factory style retainers. $30 shipped in the lower 48. SOLD!

Paypal add 3.5%- I will ship to Canada for extra fee.