Headlights will not wok
- Thread starter 2112
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
BEATAV8
The Engine Whisperer
- Joined
- Feb 14, 2002
- Messages
- 5,752
Try a new switch
- Joined
- Aug 1, 2003
- Messages
- 9,749
not assuming anything ...if you have hotwired lamps like used for h4 bulbs then check for power to hotwire relays from battery
pull dash bezel and remove headlamp/ parking lamp switch and check C connector for power
if no its fusible link at starter
is there power to the headlamp plugs, grounds connected at fenders?
check the column mounted hi/lo dimmer switch (on left side of column above brake pedal)
pull the connector and check for power at C (turn headlight switch on ) , if it has power replace the hi/lo dimmer
pull dash bezel and remove headlamp/ parking lamp switch and check C connector for power
if no its fusible link at starter
is there power to the headlamp plugs, grounds connected at fenders?
check the column mounted hi/lo dimmer switch (on left side of column above brake pedal)
pull the connector and check for power at C (turn headlight switch on ) , if it has power replace the hi/lo dimmer
Last edited:
- Joined
- Aug 1, 2003
- Messages
- 9,749
note just looked at diagram and the headlight dimmer switch designation or diagram for it is wrong
it shows in elec diagram C is 12v and A+B are out to lamps ..
in connector terminal diagram it shows A-D terminals but there are only three terminals , C is power in D + B are out ... tan to lows , lt grn to highs there is no wire at A terminal
it shows in elec diagram C is 12v and A+B are out to lamps ..
in connector terminal diagram it shows A-D terminals but there are only three terminals , C is power in D + B are out ... tan to lows , lt grn to highs there is no wire at A terminal
