heads & cam

[jerrad]

I was wondering what a set of ported stock heads with big valves and a streetable cam would pick up in the 1/4. Also who makes a good street cam that I should look into.

 

[Quick6'n'-K.C.]

Good set of heads should get you .5 off and gain 4 mph...
Cam, if yours is fine, dont take it out... ive seen too many cars flatten cam lobes once a aftermarket cam gets put in.
Id buy a roller cam if it was in the budget

BW

 

[rpk250]

I'm looking into roller cams myself right now and it looks like Weber and Comp Cams are popular ones.

 

[jerrad]

Good set of heads should get you .5 off and gain 4 mph...
Cam, if yours is fine, dont take it out... ive seen too many cars flatten cam lobes once a aftermarket cam gets put in.
Id buy a roller cam if it was in the budget

BW

Is that a set of good ported stock heads or a set of gn1's? Also there's a shop in my town that does head work but they don't have a flow bench. Should I take the cance with them or send the heads to a place with a bench? Do you know what good flow numbers are on a set of ported stockers?

 

[Quick6'n'-K.C.]

Id send a email to nick micale about the heads and who what and how much they should flow- His heads seem to flow alot more cfm than others...

http://arizonagn.net/Heads.htm

HTH
BW

 

[PHANTASM]

TALK TO FRANK G ON THE BOARD ABOUT A SET OF HEADS.

i bought a set and they are very nice and ready to bolt on.
priced right too.

 

[shawnz]

Anyone else have info on heads as im also interested.Is cnc the way to go and do you need to do the cam to get the full efect thanks John