87 GN I bought back in April. TE44 turbo, had stock converter and would shift crisp at WOT if I kept fluid level about one quart high. Had a PTC 2800 Lock-up converter installed and now at WOT it hesitates and shutters and will eventually shift but if is weak and slippy. Part throttle and 3/4 shifts are tire chirping crisp. I have no idea what has been done to the trans before I got it. I had the fluid and filter changed when the converter was installed and the fluid was clean and pan clean. Before I start chasing a rabbit around a tree, I would like some input from your guys the pro's, please !!!
HELP !!! 1st to 2nd Gear Shift Problem !!!
- Thread starter Dan Brown
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
TexasT
Texas, Where are you from
- Joined
- Sep 10, 2002
- Messages
- 7,184
Was there a bottom feeding filter in there and it got replaced with a stock 2004r "top feeder".
Posted from the TurboBuick.Com mobile app
Posted from the TurboBuick.Com mobile app
turbo nasty
Turbo Dojo / MNTR
- Joined
- Jul 19, 2001
- Messages
- 9,478
TV cable adjustment?
I have adjusted it both ways and the result does not change. Adjusting the cable did affect the shift patterns though
turbo nasty
Turbo Dojo / MNTR
- Joined
- Jul 19, 2001
- Messages
- 9,478
Both ways?
