Help with tuning

[crazygn]

Iwant to the track friday and ran a 13.50 with 40 psi fuel press,15psi boost. Then ran 12.80 with 42psi fuel press and 22psi boost. Where did i go wrong with the fuel press i had no knock.

Should i have left it at 40 psi fp and check for knock or was this ok to up the fuel press. There has to be a way to try and turn these car some with out a scan tool. Should i go up on the fuel press tell it slows up , whats the best way to tune these cars with no scan tool.


Is there any thing else that i should try to tune , the crank sensor is set, cam sensor , i set the tps with the tps tec, should i try any other gap for a high boost like 20-22psi . I hear you can pick up some time by pulling the sway bar off does this work.

My tires are still rubing on the inside this probley does not help ether i just put some oil on the inside of the tire to help it.



Can some one give me a list of things to tune or help get the most out of my car.

thanks ,kevin

 

[REDS HOT AIR]

nope.. cant have you get any faster...

really wait till you get the scan tool and get some readings off it and post them and we other eggs will get ya scrait..

as far as fuel press. it will be different from car to car and depending on how the chip was burned so its real hard to give a #.

sounds like its doing pretty good now..

i really didnt use a scan tool you seen that but i wont afraid to hurt my motor . i dont suggest that method even tho my motor took it.