The only thing left to fix on my GNX is the turn signal lever, Chrome orginals have not been available for some time now, But in black they are. It has to have delay,cruise functions. Anyone know where I might find this part. Appreciate any help Lou
Help!
- Thread starter turbolou
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
NASSTY
Active Member
- Joined
- Sep 27, 2002
- Messages
- 2,117
Here is one I found on ebay for about $148 w/shipping. eBay Motors: TURN SIGNAL LEVER NEW C 84-87 EL CAMINO MONTE CARLO (item 150254511090 end time Jul-02-08 10:07:50 PDT)
I have a NOS one I'd sell for $130 shipped in the lower 48 states USA.
I have a NOS one I'd sell for $130 shipped in the lower 48 states USA.
GNX 233 485
Member
- Joined
- Jan 11, 2006
- Messages
- 359
lever
If you have one and just want to change it because the chome is peeling, you can easily change out the chome part. They are the same for most GM applications.
If you have one and just want to change it because the chome is peeling, you can easily change out the chome part. They are the same for most GM applications.
GNX 233 485
Member
- Joined
- Jan 11, 2006
- Messages
- 359
chrome
They come apart, it has been awhile but I believe you can just twist it out. It has been about 20 years since I used to rebuild steering columns.
Any details on how to change out the chrome part?
They come apart, it has been awhile but I believe you can just twist it out. It has been about 20 years since I used to rebuild steering columns.
reply
The wire harness that goes through the lever was originally slipped on first when the switch was assembled. Unless there is some trick to it I don't see how its possible to swap out the chrome section of the switch without damaging or cutting the harness.If I thought there was a way I would do it.
Similar threads
