HRpartsNstuff - Christmas Delivery schedule

[HRpartsNstuff]

FYI - looking at the calander, anyone looking to place an order with us for delivery before/for Christmas, will need to get it in to us ASAP. They moved the dates on that PRI trade show we go to in Dec to the middle instead of the beginning of Dec. And Christmas is on the following Mon after we get back, so got to start on stuff now to have in time.

Soooo, we would have to at least have it boxed up & ready to ship (if not shipped) before we leave for the show (around 8th). There will be someone here that could possibly ship stuff closer to Christmas if necessary (if you don't want it to show up too early), as long as I get it ready and sitting there waiting to go out.

And, we have been running a couple weeks behind on orders/production, so if we don't get your order soon, we won't be able to get it to you in time for holiday delivery. Haven't heard from Santa, so can't count on him to make deliveries for us

If you get it to us later, we will do our best to hit delivery dates. Worst case, we can always send a picture & invoice to put under the tree for that special someone

==========================

Also, just for the holidays, for orders received over the next 2 weeks we are doing:

On orders under $300: HALF OFF shipping for US 48 states & discounts for other locations,

On orders over $300: FREE shipping for US 48 states & discounts for other locations,

On orders over $600: FREE shipping for US 48 states & discounts for other locations, AND a FREE T-shirt!
Just let us know size, we only have LG, XLG, and 2XL left.

Orders must be received by end of the month to be eligable.
Thanks!

 

[Otto J]

Got my motor mount today,Thanks guys!!!

 

[Bweavy]

On orders over $600: FREE shipping for US 48 states & discounts for other locations, AND a FREE T-shirt!
Just let us know size, we only have LG, XLG, and 2XL left.

You know my size

 

[nailheadpowered]

can i get a large t-shirt just for being a frequent buyer:biggrin: Also got the upper A-Arms and they look great cant wait to get the old heavy dirty uppers off and drop these baby's in. thanks again.

 

[V6RACER]

Got my motor mount today,Thanks guys!!!

Paul, is Otto better than me? I need a pass motor mount...

I need a shirt too.. XL


Shameless plug for HRPartsNStuff.. I use all of his products!

 

[nailheadpowered]

i just put the poly mounts in my car and amazing how much better the engine sits with the new mounts!

 

[Otto J]

Paul, is Otto better than me? I need a pass motor mount...

I need a shirt too.. XL


Shameless plug for HRPartsNStuff.. I use all of his products!

I just got a drivers side,Need a pass side now.
As far as me being better than you, Go ask your.. Oh never mind:biggrin:

 

[HRpartsNstuff]

Jason, well... I had a pass side here for ya, and should have an even amount of stuff left over, but somehow have 2 drivers sides left & no pass sides. Guessing I sent someone a pass side by mistake Will hook ya up next week, working on another small batch this weekend.

If you got any original pics of your car, send them over! Those are some GOOD shots!!! Got a new catalog almost finished up, might squeeze ya in

========================

Otto, might check inside that box, might just be that pass side I am missing
Kinda hope so, otherwise got a few vendors that won't like looking thru their shipment to find it :redface:

========================

Brian, the way you posted that, looks like YOU are doing the special offer too! You need an XL or just a LG?

 

[V6RACER]

Jason, well... I had a pass side here for ya, and should have an even amount of stuff left over, but somehow have 2 drivers sides left & no pass sides. Guessing I sent someone a pass side by mistake Will hook ya up next week, working on another small batch this weekend.

If you got any original pics of your car, send them over! Those are some GOOD shots!!! Got a new catalog almost finished up, might squeeze ya in

Thanks Paul. Those pics came from Clint who was taking pics at Reynolds.

Index of /reynolds

 

[Otto J]

Too late,It bolted right in with no problems

 

[HRpartsNstuff]

Too late,It bolted right in with no problems

Sometimes they will actually bolt up on opposite sides, but the motor won't be in the correct spot or level. It can be hard to tell too. Basically, best way to tell is on ALL of our mounts, the side plates that bolt against the frame pedestals (on crossmember) are different.

Look at the sideplates, at the edge closest to the block, between the button head bolts. ALL drivers sides are flat across that edge. All pass sides have a little semi-circle cut out, letting you see the welded block inside the mount a little better.

Here is a pic of an old pass side mount with the notch in the sideplate:
http://www.hrpartsandstuff.com/images/7887gpolymotormounts/mmcorrectposition.jpg
Let me know what you find out

 

[Otto J]

Doesnt the driver side also have the unpainted steel pin thru it ?
the ine i just got had this in thru it

 

[HRpartsNstuff]

Doesnt the driver side also have the unpainted steel pin thru it ?
the ine i just got had this in thru it

Yep, they all have that pin thru them (actually zinc plated)

Got to look closer to the engine (and 1/4" thick main plate), at the very EDGE of that side plate. It will have like a half circle cut out of the edge for ID if it is a pass side. The old one in the pic link I gave above doesn't have the cross pin, but it does have the half circle ID scallop, kinda between the button head bolts but closer to the motor.

 

[Otto J]

Gotta stop by his house and double check than,I dont want you to waste time sending the wrong one.Ill get back to you in hte next day or so

 

[ttypewhite]

Any X-Mas specails on motor mounts or T400 tranny mounts?