ignition module/coilpack question

[1dollardog]

Ok, In persuits to chace down problems with my car I have purchaced a stock used coil pack and used ignition module from seperate sellers. I now have them both and am ready to bolt them together and install them into the car. Can anyone tell or (show me via a pic) which color wire connects to which terminal? When the ignition module arrived the wires were just kind of bunched up in the middle of the unit with no real indication of which one goes to which post. Thanks for your help.

 

[BRAD_PADGETT]

I will look it up in the Buick chassis manual and let you know. I aasume you are wiring an 85 coil module and coil pak. Brad

 

[1dollardog]

I will look it up in the Buick chassis manual and let you know. I aasume you are wiring an 85 coil module and coil pak. Brad

Yes, That would be great. Thanks.

 

[BRAD_PADGETT]

I checked the chassis manual and it doesn not not give the wiring info. I eliminated my 85 IGN system before I ever looked at the wiring of the coil module and PAK. I can give you the 87 setup but it may be wrong or it may be right. Good luck- Brad

 

[1dollardog]

I checked the chassis manual and it doesn not not give the wiring info. I eliminated my 85 IGN system before I ever looked at the wiring of the coil module and PAK. I can give you the 87 setup but it may be wrong or it may be right. Good luck- Brad

It is probably the same but not for sure. Give me the wire color and tell me which #cyl it goes to. Thanks

 

[Jerryl]

This is for an 87.
I "think" it may work ...........
Coil

 

[1dollardog]

This is for an 87.
I "think" it may work ...........
Coil

Jerry,
That looks like what I need. The only difference I see is that the cyl #'s on my coil are opposite from the diagram. Looking down at the coil according to the diagram 1,5,3 should be on the top and 4,2,6 should be on the bottom but on my coil it is opposite from that but in what I read it shouldn't matter.
Thanks again.
Steve