I'm at the end of my rope!

[Scott Adcock]

Anybody with any experience with installing one of these? I need your help.

I havve been trying to get this MSD 6BTM unit to work with the ESC stock setup in the car and am not having any luck. I have tried wiring it up as per the instructions for a 5 pin module, with no luck. I even tried it using the magnetic pick diagram with no luck either. I thought the unit was bad, so I sent it back for any repairs. I guess it checked out ok. I reinstalled it in the car today and guess what, it still doen't work. Checked for 12 volts at the swicthed power source, looks good. I have checked the wiring several times, but no luck.

Any tips would be helpful, as I don't have much hair left after today!

I have included a diagram of the system and it can be viewed here

http://www.ackermannna.com/car/msd.html

 

[fc227]

Hi Scott
Give me a call at 203-453-6571 ext 342 . I think I can talk you though this.

Also check out the MSd web site. Looking at your diagram I think you have something wired wrong.

Here is the MSD site so you can download the "5&7 pin HEI" wiring diagram.
"http://www.msdignition.com/"