I'm rebuilding my engine......

[Mr.Spool]

The heads are staying stock.

While you have it apart.
At least mill the head.
Lifters springs etc.
With a strong bottom end you may regret later not porting the head.
Definitely some things to think about

 

[THensley]

Would .010 require new pistons also? I suppose that what, if anything gets taken out of the bores is up to them. Point is, if I need new pistons, I might as well stroke. Ideally, I'll stick with the stock pistons and standard stroke.

I recently built a relatively big dollar motor, 3.6 Porsche air cooled 6. I don't want to go down another slippery slope.

AES, Elk Grove Village IL. is the builder.

stroking it will take you down the slippery slope