Is anyone aware of a cutaway picture of the hot air intake?

[Timberwolf]

curious as to the flow patterns inside.

What I am wondering is if I could block the inlet at the back of the intake completely and plumb the air in right through the plenum hump in the middle instead.

 

[typhoon]

Yes you could.

There is a divider in the middle of everything though.

When I do the conversion (seen in the other thread), we totally gut the inside and remove several walls opening it up.

If you want to tackle this on your own, I can share all the details I have learned and help you through it.

I can even supply CNC flanges to help out.

 

[Timberwolf]

Originally posted by typhoon
Yes you could.

There is a divider in the middle of everything though.

When I do the conversion (seen in the other thread), we totally gut the inside and remove several walls opening it up.

If you want to tackle this on your own, I can share all the details I have learned and help you through it.

I can even supply CNC flanges to help out.

sent you a PM typhoon

 

[Jerryl]

Anyone know?

Seems to me, there was a picture posted on the net somehwere. Googled all weekend and came up empty.

Anyone remember where the picture is?

 

[boostmaster]

Intake

Either in 84 or 85 Hot Rod or Car Craft had an article that showed a cutaway of the intake.

 

[Jerryl]

Anyone have a copy of the pictures? I know there are a few people on this board who must have cut an intake.

 

[Martin U]

Intake pics

Try here. These are pics of what I did to mine.
Mart Urbanski
http://community.webshots.com/user/grandnat84

 

[Jerryl]

Nice set-up and pics.
Thanks.

What is in your set-up and what does she run?

 

[fireberd350]

i have that magazine article stored at home. ill scan it later tonight for ya.

 

[boostmaster]

Magazine Article

Firebird 350 can you post the pics please. Or email them to me.

 

[SLOW_85]

Not the best quality.


intake pic