Knock at a measly 10lbs of boost?

[bishir]

Today I noticed on my scanmaster I was displaying knock readings when the boost gauge was showing only 10lbs of boost. Not good.... I thought bad gas at first but I went through 3 tanks of 93 octane from different stations and still knock at only 10lbs. Is there a possiblity an engine strap could help in my situation? I don't notice the downpipe coming in contact anywhere. Thanks for any replies.

James

 

[Two Lane]

If you're thinking about an engine strap, please let me strongly encourage you to consider getting the driver's side motor mount from WWW.HRPARTSNSTUFF.COM instead.

It's a cure, not a band-aid.

 

[BADINBLACK6]

Bishir, did you check to see if fuel pressure is tracking with the boost, maybe your fuel reg is going bad. Is this at WOT and getting knock as it gets to 10lbs or like 1/2 to 3/4 throttle and your getting knock at 10lbs? Is it an after market boost gauge? Maybe try some race gas and see if you still get it.