You can type here any text you want

Leaking

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Sal Lubrano

Active Member
Joined
Apr 26, 2002
Messages
1,233
Which seal is bad? I have a leak and don't know which seal to order. The case and the evaporative core (3039245), or the seal that goes over the heater core tubes (3037635) or the gasket that goes between the inner most case and the firewall (3042381)?
 

Attachments

  • Leaking 1.JPG
    Leaking 1.JPG
    110.3 KB · Views: 100
One indicator of a clogged box drain is if there's a puddle under the car for hours after a rain or wash. In this case you can either remove the blower motor and clean from inside or drop the R/F inner fender liner and clear the drain from outside.

I would simply put the hose in the plenum/fresh air intake and limit the flow. See if the drain is working properly.

Only way to tell what is leaking is to run water on isolated areas and see what it takes to make the leak show up.
 
Pulled the blower motor and checked the drain. It was clean. It is comming in to the car at a very high point. Looks like I have to pull the heater box cover.
 
Back
Top