Limit TE45-A, Morel hyd. roller lifters, ported irons, and T&D 1.65 rockers

[Blazer406]

First let me say my car has been down for 4 years...... I bought this turbo from board member Andre Ellis about 3 years ago. I had planned on a mid to upper 10 second combo centered around some ported irons and a 45A turbo. When I purchased it, Andre had just got the turbo back from Limit. It is as new.... looks new..... never been run I don't believe since it came back. I paid him $750 without a wategate actuator. I'd like to get that back out of it. It has a 63 Garrett exhaust housing on it.... and I'm sure it is the standard 3x2 compressor cover on it. Andre went 10.60's at 23 psi or so (6.70's in the 1/8) with this turbo on a 231 cu in motor with home ported irons. It will need a 3400-3600 converter to maximize it's potential.

You won't be disappointed.

$750 + shipping and paypal fees if you pay with paypal.

The lifters were bought brand new from TA Performance (I still have the box) and have run a total of about 30 min. Due to oil pressure issues with my block, the motor has sat on the stand in the garage for months. I paid a little over $300 by the time they got to me.

$220 + shipping and paypal fees if you pay with paypal.

 

[Blazer406]

Adding a nice set of ported irons w/ 1.65 T&D rockers

I have a nice set of ported irons that I was going to run on a 10.50 combo that have less than 150 miles on them. They have a nice looking port job on them and a $537 set of T&D 1.65 roller rockers on them. They also have Ferrea valves.

Looking for $1000 for the complete heads with T&D's. + shipping + 4% for paypal fees if you pay with Paypal.

 

[Blazer406]

Lowering Prices

This stuff needs new homes.

1. Fresh Limit Eng. TE45-A turbo w/o actuator - $700
2. Morel Hyd Roller Lifters - about 30 min of runtime- $200
3. Home ported irons really nice looking with Ferrea valves including a $537 set of 1.65 T&D Roller Rockers - $900

All prices are not including shipping and add 4% if paying with Paypal.

 

[Blazer406]

ttt

got a couple people wanting pics of the heads..... emails just sent out....

Got a nibble or two on the lifters.....

 

["Reaper"]

how much for just the set of 1.65 T&D Roller Rockers.

if will separate put me first in line.

thanks
Shaun

 

[INEEDAGN]

Damn, we both had the same idea for a signature. One of us will have to change, I'll rock paper scissors you for it! LOL

If it wasn't christmas/property tax time, i'd be all over those lifters and maybe even the heads.

I don't suppose you need anything in trade?

Sorry for the thread jack.
Bob

 

[Blazer406]

Ported Head Pics

Thought I would add a few pics since I pulled the off the motor.... I just sprayed them down with brake cleaner and blew them off with compressed air. I have a couple of people interested.... but no commitments yet.

Price is $900 + shipping + 4% if paying with paypal. (educated guess on shipping is $100 via UPS ground pack and ship)

 

[Blazer406]

one more of the heads

 

[Blazer406]

Lifter Pics

Found the receipt for these.... paid $290 + shipping for these from TA Performance..... with shipping they were $311. I have someone committed to buy these..... I believe..... just wanted him to see what he was getting....

 

[Blazer406]

turbo pics

I actually have 2 turbos....

One is a TE45A turbo originally described in the first part of this thread. (note I want to keep the wastegate actuator shown in the pic that I bought separately from the turbo myself) This turbo had just came back from Limit Engineering when I bought it and put it on the shelf. It really looks practically new.

Price - $700 + shipping + 4% if paying with paypal

The other turbo is a 70 P Trim with the H compressor cover (4" inlet/3" outlet) and a .63 Precision ex housing. This turbo came off a car that went 10.0's at 29-30 psi. The face where the downpipe bolts to had a little surface rust I noticed just before I took the pics.... I hit it woth a steel brush... and sprayed it with WD 40 just before some of the pics.... it has a very little up and down play and no in/out play. They guy that I got it from on here said there wasn't any issues with this turbo.

Price - $750 + shipping + 4% if paying with paypal

 

[justin84]

Do you need anything in trade for the roller rockers? These are for a stock type lifter right?
It is late...

 

[Blazer406]

Damn, we both had the same idea for a signature. One of us will have to change, I'll rock paper scissors you for it! LOL

If it wasn't christmas/property tax time, i'd be all over those lifters and maybe even the heads.

I don't suppose you need anything in trade?

Sorry for the thread jack.
Bob

Sorry for not responding earlier....

Only things I need currently:

1.) Neutral balanced harmonic balancer
2.) Neutral balanced flexplate

 

[Blazer406]

Do you need anything in trade for the roller rockers? These are for a stock type lifter right?
It is late...

Only way I would sell the rockers separately (right now) is to have someone to commit to the heads w/o the rockers.

I feel the package price is a really good deal at my reduced price.... if you begin to add up what's there.

 

[Blazer406]

how much for just the set of 1.65 T&D Roller Rockers.

if will separate put me first in line.

thanks
Shaun

Sorry for not responding to this earlier..... I'd like to sell the heads/rockers as a package right now.... unless I get someone that wants the heads w/o the rockers.

 

[Blazer406]

TTT

Parts need to go.....

 

[Instro84]

are the lifters sold?

 

[Blazer406]

are the lifters sold?

Yes lifters just sold.

They went out today.

 

[Blazer406]

lowering prices

TE45-A with .63 garrett housing - $650 + shipping + 4% for paypal fees if paying with paypal. (doesn't come with actuator in pictures above)

70 P Trim with .63 Precision housing and "H" compressor cover (4" inlet / 3" outlet) - came off a 10.0 car @ 29 - 30 psi. - $700 + shipping + 4% for paypal fees if paying with paypal.

Ported heads with beehive valve springs and set up for hyd roller - $500 + shipping + 4% for paypal fees if paying with paypal.

T&D rockers - 1.65 ratio nearly new - $450 + shipping + 4% for paypal fees if paying with paypal.

 

[turbo billy]

what size valves in the head may be interested

 

[Blazer406]

My guess is stock diameter.... cause you can't get much bigger than stock valves in the iron heads easily...... I'll see if I can check tonight.....