Logging trans pressure with XFI

[gdsims231]

Anyone have the cliff notes on logging trans pressure with a 200r4 and XFI? Which sensor and location? I would think this is common, and would like to have some advice from experience rather than learn the hard way, as I often do.

 

[HighPSI]

It's no different than logging fuel pressure or oil pressure. Use a standard pressure transducer with 5 volt output. Wire the signal into Analog 3 (or 4-8). You can go into your software and label it (File/Analog sensor...). The sensor gains and offsets vary depending on which sensor you're using

Sent from my SM-G955U1 using Tapatalk

 

[bison]

Use a 0-500psi transducer. 200psi ok for th350 or 400. The port closest to the shifter bracket on the trans on the 200-4r


Sent from my iPhone using Tapatalk

 

[gdsims231]

Thanks guys. Seems pretty straight forward.