looking for hardware to mount cas v4 /tony dequik intercooler

[the wrath]

i need the hardware only

 

[Kip]

i need the hardware only

When you say hardware, are you just looking for bolts or the passenger side brackets etc?

 

[the wrath]

if you look in the picture there is a long bolt coming out and that long spacer i guess that is what it is below it

 

[the wrath]

the photo is in another post that i started in general engine tech.

 

[Kip]

So are you saying you have the passenger side bracket? There should be the bracket, long bolt that goes in a water pump hole, a small spacer and a threaded piece of hex stock that goes to the front cover stud. I have all of the above if you need that stuff.

 

[the wrath]

long bolt that goes in a water pump hole, a small spacer and a threaded piece of hex stock that goes to the front cover stud. i need all of this and the front cover stud. if you have it i need the stud and nut that is on the drivers side.

i dont need the bracket on the intercooler.

 

[Kip]

I will dig the stuff out Tuesday and PM you.

 

[nonosv6]

Any possibility you could take a couple of pictures and maybe some measurements of that hardware. I need all of it too lol. But maybe I can find something that will work if I had the measurements thanks. Joel

 

[the wrath]

ttt anyone have these items

 

[the wrath]

dont worry about it sold already