Lots o parts...Lots o pics

[NJ Torque]

I am not looking to ship the large peices, parts are obo... If a price doenst seem fair, please make me an offer otherwise.


Door panals off a limited, 1 pull strap is missing, some fading. - 75

Part that goes around teh dash with 3.8 badge added - 25

Chrome cowl piece - 35

Grille in good shape - 50

Interior burgandy peices that hold up headliner - 5 each

Burgandy gauge surround painted black - 25

Burgandy arm rests - 15

Saddle arm rests - 15

 

[NJ Torque]

Headlight bezels, chrome is pealing with corner lights - 50

Tailights, good shape have both sides - 100

Brown console with 3 speed shifter plate also have consle lid, for turbo 350 or 400 conversions - 100

Burgandy shifter handle - 7

Rear license plate holder - 5

Chrome front bumper - 60

Complete 87 motor with trans and harness - 2200

 

[NJ Torque]

Autometer 2 5/8 pro comp volt gauge - 15

Digital dash - 40

Electronic climate control - 25

2 GN center caps - 40

2 CD players unkwon condition - 10 each

Double roller timing chain sets - 20 each

Amp, unkown condition - 25

5 peice brgandy floor mat set - 30

Gray door panals out of my 87 SS, decent condition

Burgandy rear package tray, faded/dirty - 10

 

[NJ Torque]

87 GN grill, two eyelids broken off on the back - 50

Burgandy 3rd brake light, dirty/faded - 30

Gray 3rd brake light, dirty/faded - 30

"Long style" water pump high flow summit pump, only bolted, nevre ran - 15

Hypertech aftermarket coil, worked fine until pulled - 40

Felpro intake gaskets for vortec motors - 10

GM cam, out of my 1000 mile 350, 212/224 435/460 with matched lifters - 50

Interior peices - 5 each

Burgandy seatbelt potluck - 25

Rear interior peices from a limited - 25 each

 

[NJ Torque]

3 speed shifter - 30

Saddle seats, dirty no realrips or tears - 225 whole set

 

[Sal Lubrano]

Located in this picture. The two top pieces. Are they For a Passenger Door on a Grand National and are the pins/clips on the back broken off?

 

[joe_schindler]

Would you go $50 on the burgundy door panel tops?

If the black will come off of the burgundy gauge surround; I'll take it.

I'd also like the:

burgundy arm rests
burgundy shift handle
digital dash
electric climate control
the two light gray door pull extensions

Please let me know about the door panels and the surround, and what the total is with shipping.

thanks,

Joe

 

[NJ Torque]

Hi Joe,

Sure, I'd do 50 on the door panals. Just let me see what I can get as far as boxes go on those.

Some of the black is coming off the surround from where it was rubbing something else..., so I figure it could be taken off.

If you want to PM me your zip code/address I could do a shipping qoute


Burgandy shifter handle might be sold otherwise.

 

[NJ Torque]

Items that are pending sale:

Burgandy shifter handle
Volt gauge
Vortec gaskets

 

[joe_schindler]

PM sent with address.

Thanks,

Joe

 

[badnat]

digital cluster

i'll take it

 

[thunderace31]

Located in this picture. The two top pieces. Are they For a Passenger Door on a Grand National and are the pins/clips on the back broken off?

Ill take the 2 trim sections at the top (Black) and the 2 Silver gray ones in the center let me know how to pay I have pay pal and will ad $4 to cover the fee's let me know if this works

 

[NJ Torque]

Badnat,

You will have to wait on the digital cluster since Joe was already inline for it.

Thunderrace31, Again, you will be second in line for the trim peices.

I also have 4 Jegs "Sportstars" prostar wheel lookalikes... 15x7 and 15x8... with 215/65s upfront and 255/60's in the back... 500 for the set

 

[figga8n]

any cracks in tail lights? if not ill take them

 

[Nick McCardle]

What's it take to go from the reg climate control w/ switches to the touch? Lots of re-wiring?

 

[TwinsRacingSS]

Whats the rpm range on the cam?

 

[NJ Torque]

What's it take to go from the reg climate control w/ switches to the touch? Lots of re-wiring?

I think it was discussed in another thread you would need a car that already has it, or the harness for it.

The tailights are not cracked... you have second shot at them after JT.

The cam is rated for like 1000-5500 rpm... but made power until about 6,000

 

[TwinsRacingSS]

If you part out the motor/trans i have a brother who needs the D-5 conveter. This would help as i could drive up and pick up the cam and converter. If not no problem just get the cam.......maybe shipped, up to you

 

[Donny Lowrida]

How much for the "BUICK Turbocharged" Hood mat?

 

[NJ Torque]

If you part out the motor/trans i have a brother who needs the D-5 conveter. This would help as i could drive up and pick up the cam and converter. If not no problem just get the cam.......maybe shipped, up to you

I would be willing it split it up, just would like some comitment of other parts too... which there doesnt seem to be any.

How much for the "BUICK Turbocharged" Hood mat?

Where did you see that listed? its NOT for sale...