LS-1 brake information

[Red Regal T]

I need to know where I can get brackets for LS-1 12" brake conversion. Brackey holds the LS1 caliper to G-body spindle. I have a website that says they make them but they don't respond. Anybody have info? Here's website with pictured brackets.

http://www.ibild.com/monzavegaparts.htm

 

[BOOSTEDGNs]

you could try this guy he responds pretty quick Im ordering hubs right now and am inquiring about the brackets as I type this.
http://www.thirdgen.org/techbb2/showthread.php?s=&threadid=330253
Alan

 

[BOOSTEDGNs]

I just emailed will let you know if he responds back tonite..

Alan

 

[BOOSTEDGNs]

john

you wouldnt happen to have seen somewhere that does an exchange on the parts would you? looking to cut some time off this project and having my garage in disarray doesnt help either.

If there were someone that did an exchange on this that would be swwwweeet.....I read on the other board montess he comtemplated doing this service Im gonna email after this thread.

Alan

 

[Red Regal T]

I have links to pictures of the conversion and a Monte SS forum thread discussing the conversion. .................

The only thing I need to put my hands on is the brackets.

http://www.montecarloss.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=18;t=002022;p=

http://pg.photos.yahoo.com/ph/taram...d=&.done=http://photos.yahoo.com/taramiller72

http://pg.photos.yahoo.com/ph/bmmontess/album?.dir=/86d4&.src=ph

 

[Red Regal T]

I got a line on someone who makes brackets for the LS1 brakes and also the C5 brakes. As soon as I confirm he supplies the brackets, I'll post info.

 

[mybuick]

will these fit inside a 84 gn wheel?

 

[Walker231T]

I got a line on someone who makes brackets for the LS1 brakes and also the C5 brakes. As soon as I confirm he supplies the brackets, I'll post info.

Red Regal T, any word on your supplier you found yet? I'd like to get the brackets if they have them.

 

[Red Regal T]

I had the right guy, in the first place. i_bild@comcast.net His name is Brady and claims to have some sets in stock. He's on the road right now with limited access to his computer, so if he doesn't get back right away, be patient.

http://www.ibild.com/monzavegaparts.htm

 

[Walker231T]

I had the right guy, in the first place. i_bild@comcast.net His name is Brady and claims to have some sets in stock. He's on the road right now with limited access to his computer, so if he doesn't get back right away, be patient.

http://www.ibild.com/monzavegaparts.htm

I just got an email back from this guy and he doesn't have any of the brackets made. Does anyone else have a source for these brackets??