redsled579
Member
- Joined
- Apr 2, 2009
- Messages
- 30
Spohn LSX swap mounts for 3rd gen F body and 78-88 G body= have some scuffs on powdercoat but never used, with a low mile set of 98-02 gm F body motor mounts and bolts $100 + shipping
Summit racing LSX 25% underdrive balancer fits 98-02 F body accessories, Less than 1k miles $75 + shipping
EPP/Brute Speed Blower cam 232/240 595/608 on a 115 (3 bolt) has 2 hours run time (no pics- still in engine, if it doesn't sell its staying in there) $300 + shipping
LS2 Intake with silver high flow SPEED INC fuel rails, never had fuel in them $300 + shipping
LS3 Pistons and rods, I bought them used, one piston has ring land cracked, 2 have some small marks but should be salvageable. $100 + shipping
LS clutch kit came with T56 I bought, looks to be a ram puck style with steel sfi flywheel, has wear but came out of a running driving car $100 + shipping
LS3 Camaro clutch kit (flywheel, disc, pressure plate) 12k miles, has some visible wear, but came from running driving car. Bolts from pressure plate to flywheel not included, had to reuse them $75 + shipping
LS1 Rotating assembly with one bad piston- 24 tooth, 3.908 bore(.010 over) mahle -16cc dish, eagle H beam rods with ARP bolts, stock journal size LS1 crankshaft $500 + shipping
LY6 intake manifold and fuel rails $40 + shipping
Ill get back to everyone as soon as I can, sometimes hard to get to a computer during the day for me
ADD 3% paypal fee
shipping and/or pickup would be out of Pittsburgh, PA 15205
Summit racing LSX 25% underdrive balancer fits 98-02 F body accessories, Less than 1k miles $75 + shipping
EPP/Brute Speed Blower cam 232/240 595/608 on a 115 (3 bolt) has 2 hours run time (no pics- still in engine, if it doesn't sell its staying in there) $300 + shipping
LS2 Intake with silver high flow SPEED INC fuel rails, never had fuel in them $300 + shipping
LS3 Pistons and rods, I bought them used, one piston has ring land cracked, 2 have some small marks but should be salvageable. $100 + shipping
LS clutch kit came with T56 I bought, looks to be a ram puck style with steel sfi flywheel, has wear but came out of a running driving car $100 + shipping
LS3 Camaro clutch kit (flywheel, disc, pressure plate) 12k miles, has some visible wear, but came from running driving car. Bolts from pressure plate to flywheel not included, had to reuse them $75 + shipping
LS1 Rotating assembly with one bad piston- 24 tooth, 3.908 bore(.010 over) mahle -16cc dish, eagle H beam rods with ARP bolts, stock journal size LS1 crankshaft $500 + shipping
LY6 intake manifold and fuel rails $40 + shipping
Ill get back to everyone as soon as I can, sometimes hard to get to a computer during the day for me
ADD 3% paypal fee
shipping and/or pickup would be out of Pittsburgh, PA 15205
