LS1 Mass Air Flow Sensor

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Mrneg9

Get Some !
Joined
Feb 10, 2008
Messages
431
Update. Had a couple more of these come available yesterday. PM me if interested. Brand new LS1 Mass Air Flow Sensors. These are the same ones used for the 5.7 Camaro/firebird applications. 3 pin connector. You will need a translator to run it in your Buick V6. I'm am selling each one for 100.00 shipped in USA. Thanks.
 

Attachments

  • IMG_20160305_152133319.jpg
    IMG_20160305_152133319.jpg
    4.4 MB · Views: 81
  • IMG_20160305_152212721.jpg
    IMG_20160305_152212721.jpg
    3.7 MB · Views: 72
Last edited:
You can use for 3 in but will have to stretch you 3 inch poly joints or buy a 3 1/2 in to 3in poly joint.
 
Last edited:
The MAF actually measures 3 1/2 in. You have to stretch the rubber coupling a bit.
 
Last edited:
I'll take it pm me PayPal info I'll send as gift

Sent from my XT1585 using Tapatalk
 
Correction it won't fit your stock flex intake hose. You'll need to get poly couplings. I was able to stretch my 3 in couplings to fit but 3 1/2 inch fit better.
 
Let me know if you still want it. Most people use these when stepping up to a cold air intake.
 
If it helps, I have a new coupler that will hook the 3.5" LS1 sensor to a 3" MAF pipe.

looks like this...
s-l1600.jpg
 
Got it today; looks great! Now off to find a deal on a translator

Sent from my XT1585 using Tapatalk
 
Awesome. I've seen MAF used ones sell for 125.00 I know cause that's what I paid at one time. I figure at 100 bucks shipped that's a good deal. Ive got a hook up. I might have a couple more if any one else is interested ?
 
Hey guys just had a couple more of these come available yesterday. If interested shoot me a PM. Thanks.
 
Back
Top