LT1/LS1 MAF for Translator

[RegalT-type85]

Could i only use LT1 MAF or are some other GMs the same?

I'm thinking my MAF is crapped out, gonna go to the boneyard tomorrow. What should i look for? 5.7 only ? I set the translator right but still dying out, TPS is at .42, WOT only goes to 4.3ish) o2 readings are below 720mv, Maybe a Bad o2 as well.

 

[Scott87]

With the translator you can use just about any maf out there. LT1 3", 3.5", Z06 maf. The translator is pretty versatile and makes your selection options variable.

If the maf is larger than the tube you could always get size reducing rubbers from http://www.racepartsolutions.com/ .

 

[RegalT-type85]

With the translator you can use just about any maf out there. LT1 3", 3.5", Z06 maf. The translator is pretty versatile and makes your selection options variable.

If the maf is larger than the tube you could always get size reducing rubbers from RacePartSolutions - Fast Parts At Discount Prices .

alright so any GM 3'' or 3.5'' will do Sweet, Dying here but im gonna be a trooper and go to the boneyard tomorrow morning. Thanks for the help

 

[TurboMonte 2]

BUT---if you currently have only a LT1 & 3" MAF inlet pipe,,,you'll also need a larger/3.5"maf inlet pipe--or undesirably reduce back down to 3"