I have set of ported M&A heads setup up for a hydraulic roller that I would like to sell. The passenger side head (number 4) has been professionally welded/repaired due to an exhaust valve failure. They have been CC'ed and leak checked. The heads have received a clean bill of health. Currently, the heads are still at the machine shop pics to follow. Disclaimer.. These heads were designed for a 4" bore. The heads will work on a 3.8 with some minor bore notching on the intake side. Here is a break down:
Fresh 3 angle valve job and seals
PAC BBC Beehives
Comp retainers
Ferrea 1.9/1.6 valves
Crane 1.6 rockers and supporting hardware
Guide plates
One piece pushrods
ARP head studs slightly modified to clear ATR headers
Powder coated M&A valve covers with gaskets and bolts
$1550 OBO..
Fresh 3 angle valve job and seals
PAC BBC Beehives
Comp retainers
Ferrea 1.9/1.6 valves
Crane 1.6 rockers and supporting hardware
Guide plates
One piece pushrods
ARP head studs slightly modified to clear ATR headers
Powder coated M&A valve covers with gaskets and bolts
$1550 OBO..
