M&A Intake, DLS CAM, RODS,Plemun,Ijecters and More

[tom robison]

Have a few items I would like to sell

M&A Intake manifold have had on a car needs some fuel fittings 550.00 shipped
90mm accufab throttle body with iac and tps NEW 275.00 shipped
70mm upper plenum, polished and engraved from gn1 performance. 100.00 shipped
Oil return line 50.00 shipped
DLS Hyd roller cam cut for TA nose hardware, 218/218 577/577 112* 300.00 shipped (cam only)
96lbs racetronix injecters used for 28 passes. 250.00 shipped
Intank fuel pump XP PLUS new 50.00 shipped
6.5 Oncenter Crower rods can be cut for offcenter 550.00 shipped
20 bolt timing cover 40.00 shipped
14 bolt cover from a 3.2l, cut .120 for stage 2 motor. have to use an electric water pump 50.00 shipped
oil dipstick and tube 40.00 shipped
New set of JE .930 pins 100.00 shipped
Stock intake that has been ground on to fit on and off center blocks 200.00 shipped
Stock fuel rail 50.00 shipped

I can take paypal. Thanks

 

[tom robison]

 

[bpman1234]

pm sent on .70mm upper plenum, polished and engraved from gn1 performance. 100.00 shipped

 

[tom robison]

pm sent on .70mm upper plenum, polished and engraved from gn1 performance. 100.00 shipped

PM replied.

 

[tom robison]

Upper Plenum SOLD pending payment

 

[tom robison]

Dip stick and fuel pump sold. Thanks

 

[tom robison]

Sale pending on throttle body

 

[kamprettyboy]

Next in line on 70mm upper

 

[tom robison]

Throttle body sold.

 

[49-blues]

Are you sure the pins are .930 and not .927s? Why does one of them look shorter in length than the others? What's the HP rating for the pins? Very interested.

 

[tom robison]

Are you sure the pins are .930 and not .927s? Why does one of them look shorter in length than the others? What's the HP rating for the pins? Very interested.

I bought the pins for the rods I have list so yes .930. One of them is out of the bag and makes look smaller and they are good for 900hp.

 

[CHANCE]

Is the M&A intake still available?