M & H Drag Radial

[V8killR4U]

Any one have any feed back on these M&H Drag Radials. I cant find anything on them when doing a search.

 

[Adam Connell]

I was going to ask the same question last night... I would like this info as well...

 

[Quick6'n'-K.C.]

On my first tta that i owned, there was zero rear suspension mods to the car.
I ran the 305/40/16 M&H racemasters on TTA rims. That was about 5-6 years ago.

The best ebrake launch i got with the stock turbo, D5 convertor, and bluetops was consistant 1.65s to 1.69s ... My best ones were 1.60 and 1.61 on sundays with the sun out to heat the track, and cool out to keep the motor cool. The car had no front swaybar on it.

The tires hooked good, but on the street they were decent, decent like my MT et street drag radials now.

What is the price difference between the two?
BW

 

[Adam Connell]

Ok Check over in the wheels/tires section. I made a thread a few weeks ago and a guy who just bought the drag radials responded. Sounds like I will have a set on the way pretty soon since there were no fitment issues!

 

[TURBOGTA1]

Any one have any feed back on these M&H Drag Radials. I cant find anything on them when doing a search.

I just tried a new set this weekend at the track. 275-55-16, 28" tall tire.
I could not launch the car hard on them,

 

[V8killR4U]

On my first tta that i owned, there was zero rear suspension mods to the car.
I ran the 305/40/16 M&H racemasters on TTA rims. That was about 5-6 years ago.

The best ebrake launch i got with the stock turbo, D5 convertor, and bluetops was consistant 1.65s to 1.69s ... My best ones were 1.60 and 1.61 on sundays with the sun out to heat the track, and cool out to keep the motor cool. The car had no front swaybar on it.

The tires hooked good, but on the street they were decent, decent like my MT et street drag radials now.

What is the price difference between the two?
BW

Theres not a big price difference. A few bucks 10-15$. The point is for most considering them is that they offer a 28" tall tire. If MT offered the same size i'd simply go with them, cuz I know they work. So its not really a price issue more of an tire size option issue

 

[Adam Connell]

I just tried a new set this weekend at the track. 275-55-16, 28" tall tire.
I could not launch the car hard on them,

Hmmm, well you are pushing well over 500hp so Im not too worried as Im close to stock and I would run the same exact size... so what kind of 60ft did ya pull and what ET does your car usually run?

 

[Lee Thompson]

Mt

Theres not a big price difference. A few bucks 10-15$. The point is for most considering them is that they offer a 28" tall tire. If MT offered the same size i'd simply go with them, cuz I know they work. So its not really a price issue more of an tire size option issue

MT offers a 275-60-15 DR or am I missing something here. Go to their webb site and they did have blems for a great price as I bought 2. 2 for $282 shipped.

 

[V8killR4U]

MT offers a 275-60-15 DR or am I missing something here. Go to their webb site and they did have blems for a great price as I bought 2. 2 for $282 shipped.

I might not have mentioned im on a 16" GNX replica rim and wanted a 28" tire.

 

[YellaGN]

Not real sure of the specs, but i use a 28" tall M&H Racemaster. I believe its a full 10" footprint. Its very similar to my old 28x11.5 ET street, but about 3/4" fatter tread width. Works better than ET streets on the street IMO.

 

[boostmaster]

M&h

I bought a set this summer 275-55-16 (28") tall tire. I can say they hook very well. Went from a 2.00 60ft to a 1.71 no other changes.