MAF part #

[SS/GN]

I have a GM MAF #25168491 / 3371134A.Can anyone tell me if it is a good maf to be used with a translator.It appears to be almost 4 inch??Thanks for any help

Kevin

 

[PSU 98]

It's the LS6 (ZO6) MAF sensor.

 

[1KWIKSIX]

I have a GM MAF #25168491 / 3371134A.Can anyone tell me if it is a good maf to be used with a translator.It appears to be almost 4 inch??Thanks for any help

Kevin

Hey Kev,

I've been using one on my car with no problems for the last couple of seasons along with a GENII Translator. The GENII has a specific setting for this MAF . I think it measues 3 3/4", so you will need a silicone couplers this size to fit properly.
I'm using this in conjunction with a 3 1/2" MAF pipe with a 4" tin man intake and 4" turbo inlet, so I needed a few odd sized couplers but I did find them readily availableYou will also need a 3wire to 5 wire adapter harness. You can get these from Full Throttle, Caspers or LS1 tech?
Think I went with the LS1 tech because it incorporated the IAT function.

.

 

[GNVenom]

http://www.installationinstructions.com/FYI/maf-dimensions.pdf