Master Power Turbo - Can I use this?

[GN X-BODY]

Hey Fellas,

I've had a Master Power turbo laying around for about a year and I'm trying to find a use for it. Here is the model number 810007. Do you guys think that this would be too large for a relatively stock motor? Please let me know your thoughts.

Here are the specs on the turbo:

Turbine Wheel:
-Exducer Diameter: 2.30"
-Mayor Diameter: 2.91"

Compressor Wheel:
-Exducer Diameter: 2.40"
-Mayor Diameter: 3.58"

Turbine Housing:
-A/R: .68
-Type: Undivided
-Discharge: V-Band
-inlet: T4

Compressor housing:
-A/R: .70
-Air Inlet: 4.00"

Thanks in advance,
Vince

 

[whitehot1]

Hey Fellas,

I've had a Master Power turbo laying around for about a year and I'm trying to find a use for it. Here is the model number 810007. Do you guys think that this would be too large for a relatively stock motor? Please let me know your thoughts.

That turbo is the size of a 62-1 so i would say it's not to big for a stock GN motor.

You will probably have trouble mounting it though and hooking up the downpipe.

You would also need a higher stall converter than stock.

810011 T4 ST2 Undivided

John :smile:

 

[gnandy]

i have a master power 62-1 in my gn..it works pretty good...i just ordered a new converter for it so i will let you know how it works out..