I have just recently got a ME 8 position chip. 1 problem so far. I have set the FP per instructions for 48 psi. on pos#2 the richest setting for 93 octane I can only get a 1349 EGT reading. I started w/17lbs of boost and got 1*KR,so I turned the boost down to 16 and got 0 KR but cannot seem to get enough fuel for an acceptable EGT reading. Should I raise the base FP or adjust some numbers somewhere? I am not too sure as the instructions say to put the FP at 46 to 48 psi. also at the top of 2nd and the top of 3rd gear it feels like it is running out of fuel as I can feel a surge in performance. It feels like it is trying to go but doesn't have enough fuel. My FP at wot is 63 psi. I am new to this setup so any advice would be appreciated.
Tom
Tom