Mega props for Razor (Julio)

[Raven]

I just want to let everyone know - if you're even just remotely considering an alky kit, you will find no one better to deal with before AND after the sale than Julio (Razor).

I have called him and left messages with questions and he's called me back right away, took care of shipping me a longer feed hose when I changed the install location of the pump, and has answered other questions when I've called with all the patience of Job.

He IS the man!

Support AlkyControl - Julio is the best there is in my book.

 

[1TONY1]

I am putting together my own kit for a non-Buick s/c application............did that bother Razor ?? No, he still spent 30+ minutes on the phone with me going over my ideas and giving his input. You will not go wrong dealing with him !!

 

[geno]

You would be hard pressed to find any vender as helpfull
Jack Cotton is the only other vender ive delt with that takes the time to really help you in anyway he can. These 2 guys are there when you need them and dont blow you off and make you feel like your bothering them or you dont know what your doing:rolleyes after spending $ with them:

 

[wh1-Denver]

Yea he is da man! I have two of his kits one on my T-Type and one on my wife’s 03 GS and will be buying a third once my wife gets her GN up to snuff. You need to have the car running right prior to installing the alky. Razor spent over 5 hours with my car to eliminate numerous vacuum leaks, bad solenoid, and check valves before he would install the kit.

 

[bishir]

I told Julio I couldn't afford the $$ for the kit and my wife is driving me crazy. So he came over worked some overtime for me, and took the wife to dinner while I put the kit on my car! THEN he took out the trash and took the dogs on a walk. What a guy!

 

[turbov6joe]

Julio spent a hour or more with me in BG making passs in my car with his ECM and laptop making alky adjustments....great guy!
I will say this though, if your cooking out in the pits beware, he'll know when the foods done and the man can eat

 

[wh1-Denver]

Originally posted by turbov6joe
Julio spent a hour or more with me in BG making passs in my car with his ECM and laptop making alky adjustments....great guy!
I will say this though, if your cooking out in the pits beware, he'll know when the foods done and the man can eat

Yea, I had to take out a second mortage on the house to feed him for all the work he has done on my cars.

 

[fast eddie]

Julio need's to vacation up here in Michigan in the summers

 

[Razor]

As far as eating..

My Dad use to say...
"A man must build his largest shed over his best tools"



You guys are too much...

 

[turboG]

I agree, Julio really helped me out. I have made several phone calls to him and he really tries to help. He took time out of eating pizza on wed. nite at BG to help me with my car. We made several blasts down the pkwy and even took his ecm outta his car to let me try it. His help and advice were very appreciated...and to top it off, the thing he said change was the problem...damn coil packs He also has a pretty good alky kit ...if only they made headgaskets as good, right Julio

thanks again

 

[19gn87]

Originally posted by turboG
...if only they made headgaskets as good, right Julio

Not sure we can fault the head gaskets...but maybe we could all pitch in and help him "upgrade" to 93 rather than 87 (couldn't help myself...)

 

[turboG]

Originally posted by 19gn87
Not sure we can fault the head gaskets...but maybe we could all pitch in and help him "upgrade" to 93 rather than 87 (couldn't help myself...)

hehe...no doubt