Melissa's set up

[Grumpy]

ok where do I start ??
Engine
girdled short block with .020 pistons
stock crank cut 20/20
stock rods
212/212 roller cam
mild set of ported heads
Champion ported stock intake
stock crappy factory headers and crossover
3" down pipe to a dual 3" exhaust
V4 stock location intercooler
66 BB turbo
60# inj
single pump in tank
ALKY DUAL NOZZLE set up from Julio
200R4
Bruce from PTS 9/11 converter. Bruce sent it to me because I am such a nice guy . this converter ROCKS !!!! Worked awesome !! Thanks Bruce !! :biggrin:
stock rear end w c/clip eliminators (remember we are only running drag radials)

that's all coming to my brain at this time

 

[Sweet6]

Nice. Simple(easy for me to say) and works awesome.

Good Job

 

[Grumpy]

oh forgot TURBO TWEEK chip :biggrin: here's an eng shot

 

[TurboJoe3.8]

Hey Dan, what was the boost at, and the timing in the chip at, on those sweet passes?

Just being nosey :wink:

thanks, Joe

 

[turbobuick]

oh forgot TURBO TWEEK chip :biggrin: here's an eng shot

What size is the inlet pipe and what are you usign for a MAF?

 

[Grumpy]

What size is the inlet pipe and what are you usign for a MAF?

hey Chris...4" MAF pipe with a 3 1/2" GM MAF to a 4" air cleaner

 

[Grumpy]

Hey Dan, what was the boost at, and the timing in the chip at, on those sweet passes?

Just being nosey :wink:

thanks, Joe

more than TSM "legal" boost ... we have run higher but tryin not to push to hard

 

[Just a Six??]

Is the 4" pipe from Mark? If not where? Thanks!

 

[Sweet6]

where are the alky lines?

 

[fitz3820]

where are the alky lines?

You can see them on the top of the up-pipe, just before the rubber coupling.

 

[Sweet6]

OK I see them. They were hard to see in the picture. I thought maybe he had them hidden underneath the uppipe.

 

[22lbChevelle]

Most important part....How much boost?!?! :tongue:

 

[whitehot1]

Most important part....How much boost?!?! :tongue:

He kind of answered that in post #7.

 

[bison]

Most important part....How much boost?!?! :tongue:

Over 24psi :tongue:.

 

[PaCemkr86]

its impressive Dan..

any luck on the video yet?

 

[Dewey]

What kind of hose clamps are those? They look stout. Where can I get some?

 

[dantheman]

any truck shop sell those hose clamps

 

[Dennis F]

What kind of hose clamps are those? They look stout. Where can I get some?

NAPA.

 

[JoeNational]

Mark at buickgn.com has them as well.. That is where I got mine, Great clamps, it will start to squeeze the pipe closed before they break.

 

[bison]

Mark at buickgn.com has them as well.. That is where I got mine, Great clamps, it will start to squeeze the pipe closed before they break.

How did you find this out? :biggrin: