Mike Licht / Bob Bailey chip question

[Turbo6Smackdown]

I got an extender extreme alky chip from you Mike, and it's cut for a 4" tube with no screens with a cobalt ss integral maf. Though, if I'm using your gen 2 translator, and I set it for the appropriate LS1 maf, which I have in there now, will it still work? Anyone?

 

[Eric Stage I]

You select the MAF type in the Gen2. The chip is not made for specific MAFs. I assume you have the Extreme G version?

 

[bpman1234]

maf input select ls1.

 

[Turbo6Smackdown]

Yes. It's to measure up to I think 712 grams thru the maf, with the 2nd gen translator and alky.

 

[TurboBob]

what is the chip number?

Bob

 

[Turbo6Smackdown]

It says

GWOX7BOG
4" MAF
GEN-2
I can post a pic if that's not correct.

 

[TurboBob]

the 4" MAF note on there just means the the BLM is set up so that it won't go below 120. There are wierd turbulence issues on the 4" pipe that make this necessary on some cars.

You can run it with any MAF, just set the Gen-2 accordingly.

Bob

 

[Turbo6Smackdown]

So could that potentially mask any fueling issues though?