Mint condition GN quarter glass

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

OConnor

Active Member
TurboBuick.Com Supporter!
Joined
May 29, 2001
Messages
178
What do you guys have? Looking for both sides for low mile GN.
 
I havent been able to find a mint set for my car in 8 years....

Good luck to you !!

Bryan
 
That's the problem with mine. Previous owner hit them with a buffer ...The glass is fine

Bryan
 
Here is what I did. I located a nice set of T-Type windows. My concern was the rubber as well. I seperated the chrome from the window. I took the chrome to a gun shop and they sandblasted them and coated them with Cerakote. This is a high heat coating that cures at low temps. So no warping. Put them back together and looks good as new. Just my $.02

http://www.cerakoteguncoatings.com/...3Z0-wmcPvV67WTfgTt06kvHlHbIgCMXIWJBoCC9jw_wcB

trim.jpg
 
Vader that looks great! How do you separate the chrome?
 
There are four small nipples that need to be cut. I just used a small hobby knife. The push the frame through the rubber.
nip.JPG

nip2.JPG

windows.JPG
 
Back
Top