Misc. racing stuff. 9"gears, FP regulator, Coil pack and module, Strange master cylinder

[turbobitt]

Coil pack and module just tested and verified good. Coil pack is an Accel high output unit with brass terminals. This setup is 8 second proven and has been taken off my car for CNP/XIM - $175 plus shipping

SX performance fuel pressure regulator (Not for stock rails) - $80 + shipping

Stage 2 valve covers. One cover has a milled area where I was going to put an oil filler - $200 + shipping

Ford 9" used 3.89 ring and pinion - $75 + shipping

Used Comp Cams 9.45 long x .080 wall pushrods $40 + shipping

Strange 1 1/8 master cylinder - $60

Meziere used water pump motor only - 100$

Please PM if interested. I don't always remember to check back at this post.

Allan G.

 

[larry33kc]

Pics of the Master cylinder?

 

[turbobitt]

Pics of the Master cylinder?

Will take them later tonight when I get home.
AG.

 

[forcefed3.8's]

Do the valve cover work with the jessel rockers?

 

[turbobitt]

Do the valve cover work with the jessel rockers?

To be honest I really don't know what the difference would be.
AG.

 

[forcefed3.8's]

The jessels have valve cover mounting holes. I had a set with the holes in the center, but they were slightly off from mounting on the rockers

 

[turbobitt]

These holes are directly in line with the head pedestals. I couldn't say if they would work on the Jesel setup.


Sent from my iPhone using Tapatalk

 

[turbobitt]

Pics of the Master cylinder?

Sent from my iPhone using Tapatalk

 

[turbobitt]

TTT.

 

[turbobitt]

TTT

 

[turbobitt]

TTT

 

[Boostdeznuts]

Will the master cylinder work with stock vacuum brake setup?

 

[turbobitt]

I don't know. I had it mounted directly to the PM adapter and set up as manual brakes


Sent from my iPhone using Tapatalk

 

[TurboTGuy]

Interested in the coil pack/module combo.

Need to justify the funds, my current set up works just fine............. today.