modded ecm users (for big injectors)

[REDS HOT AIR]

who modded yours and have you had any problems with it ?

 

[TType85]

We have one modded by Dan Smith (dunno where he went?)

it works great. car even passes smog on the 55's

I am going to have mine modified by Red Armstrong unless I find a good used one or someone else cheaper.

The Dan Smith modified ECM has been working great with my 72's (JC Chip, 70 turbo, etc)

going to track test it thurs

 

[BLACK6PACK]

Red did mine. $135 and no problems so far.

 

[TRENT THOMPSON]

red also no problems

 

[GNVAIR]

PTE did mine. I found out later that they send them directly to Bob Bailey. But mine works great so far

 

[TTA850]

Red - $135 + $9 to ship back and no problems so far

Steve

 

[REDS HOT AIR]

so Red or Bob Bailey??

where is Bob Bailey ..caspers??

how long of turn around time should i expect??

i hear Red is a good guy to deal with just hard to get on phone.

y'all would be surprized how many emails i get thinking im Red Armstrong...and i direct them to the right Red

 

[bruce]

Originally posted by REDS HOT AIR
so Red or Bob Bailey??

I know Bailey is using the correct drivers.
Some folks were just soldering in heavier duty drivers, which is kinda OK, but Bob had the correct ones.
You can reach him thru Ramchargers.

 

[rob nolan]

Red did mine no problem

 

[matt87]

Ramchargers, no problems, bit pricey $150.00

 

[NEARING]

Red when are you going to richmond again?
I am going this friday.

 

[Scott Atk]

Does anyone know the long term affects of running low imp. injectors without an ecm mod? I swapped out my modded ecm for a regular one to troubleshoot a problem and noticed no difference in the way the car ran.

 

[TURBO 6]

Send it to Red.
Scott, I think you'll burn your injectors up before too long.

 

[toofastforyou]

Dynotech...

I got mine from Dynotech in Manville, N.J. but I don't know who makes them for them. Not a single problem with it though...'Bye, Claude.

 

[REDS HOT AIR]

Originally posted by NEARING
Red when are you going to richmond again?
I am going this friday.

once i get computer done and get some chips for it i'll be trying it out again but im not to sure i'll get it much faster till i upgrade my fuel pump situation...not sure how far the single 340 pump will go


if i have the time i'll see if i can get up there and watch you hurt peoples feelings..

you talking richmond dragway right?

 

[bruce]

Originally posted by Scott Atk
Does anyone know the long term affects of running low imp. injectors without an ecm mod? I swapped out my modded ecm for a regular one to troubleshoot a problem and noticed no difference in the way the car ran.

Some guys have been doing that for a long time.
I did a 300 mile run once with a normal ecm without a problem.
If you want to do that I'd suggest carring a spare ecm or 2.

 

[NEARING]

Originally posted by REDS HOT AIR


once i get computer done and get some chips for it i'll be trying it out again but im not to sure i'll get it much faster till i upgrade my fuel pump situation...not sure how far the single 340 pump will go


if i have the time i'll see if i can get up there and watch you hurt peoples feelings..

you talking richmond dragway right?

Yes richmond.
Bobby and a couple of guys from NC. might go too he said.
I just finished installing the SMC alky
Going to try to run 21-22 psi and hope my stumble out the gate is gone so I can try the T-brake at 14psi !

 

[REDS HOT AIR]

i'll try it out for ya..

i hate it when i cant drive my car...

 

[Richard Inglett]

Pre-Ramchargers (Modern Muscle)

Had mine done by Modern Muscle. No problems and it has some kind of Factory Authorized Remanufactured Module Sticker along with a sticker that states the type and date of modification.

Friends using Red Armstrong's ECM's have also had success.