Modded OEM Fuel Rail

[turbo96max]

I converted over to e85: Had a tig welded 8 an fitting on the inlet. Then i decided to try a dual feed and didnt have tig welder available so i gave the return side a go with a mig welder 8 an . Could not get it to seal perfectly. Didnt want to waste more time grinding and rewelding so i tigged a second rail. Pics will be up tonight. The tig welded inlet fitting does not have issues, only the return needs some grinding down and finishing up.


will say 65 shipped

 

[turbo96max]

tig inlet

mig return

this is OBO guys , easy fix on the mig side needed only. stock fuel reg still bolts up without issues

 

[turbo96max]

incase anyone wants to do a diy double pumper and would be interested in a hanger setup like mines, i have an extra hanger sending i could get the same local machine shop mod for you as well for a few bucks. they welded a 5/16 grounding stud and additional 3/8 tube on the hanger. PM me if anything, this is not hard to do but i know in some areas machine shops are limited for these little type of projects

 

[turbo96max]

price too high? how about 55 shipped?

 

[turbo96max]

bump: 45 bucks dont need this