Mounting location for ALKYCONTROL main controller?

[TR Custom Parts]

Where are you guys mounting the main controller box??

 

[Boost231]

the main box im putting behind the radio. the contoller box in the foot ac vent

 

[dsa87gn]

I put the control box in the front AC vent under the steering wheel.

Wire tied the Main Power connection box to the steering column like Julio suggests.

The Turn on/Initial box I velcro-d to the very front side of the center console
right near the ALDL plug. Its half hidden by the under dash insulator panel.
Just the removable cover sticks out if I need to adjust those, but I never have.

 

["Turbo-T"]

If you mean the PAC I have mine zip tied up on the dash frame under the steering column cover that houses the a/c vent.

 

[QUIP'6']

Where are you guys mounting the main controller box??

heres a video of some trouble i was having and it shows where my contoller is. be patient it is when there is 19 seconds left

 

[jays87gn]

Here's a pic of mine

 

[TR Custom Parts]

Ended up mounting the main controller box on a nice flat surface on the back of the AC unit that is accessible thru the glovebox. Used heavy duty velcro to mount it and the door to the controller is easily reached as well as the main fuse.

Had enough crap underneath the steering column (alarm box and shock sensor for the alarm) so this works out great. You can also get to the green wire for the MAP signal too. No need to run the extra wire out thru the firewall.

As far as the remote, I took the easy way and wedged it in between the radio pod and main dash.

 

[TR Custom Parts]

Couple pics of where I mounted the main unit. Almost like it was designed for it. Just had to extend a couple of wires.

 

[Razor]

NEATO... Nothing like when the juices get flowing for creativity

 

["Turbo-T"]

Wished I would have thought of that. How did you secure the box down?

 

[TR Custom Parts]

Attached with high strength velcro from Radio Shack.