Mounting options for control

[corsair231]

I don't like the PAC control panel being stuck in between the instrument and radio pods. What other options have ya'll used. I thought about in the bezel where there is a space for what I think maybe the twilight or rear defog switch (my car has neither). It's always on and there is the power injection light and the pressure l.e.d in plain view so I don't think I really need to see the panel very often. Anybody mounted it in the glove box or console.
Thanks

 

[jurassic five 7]

Ive seen mounted in the little AC vent under the steering column before. Pretty stealthy, so nobody will ask you what it is.

 

[buttonfly]

I'll take a pic of mine, but I used some 3m double sides tape and stuck it to the dash. I put it under the dash about 3-4 inches left of the ADL port. I personally wanted it somewhere else too.

 

[scot w.]

I made mine into the dash. i have another trim plate so if it was to ever be taken out that trim plate would go too. Here is a picture.. Scot w.

 

[WeSS]

panel

give us a call and we will send you a decal. You can put it on the bezel where the defroster switch goes. That is if your car does not have the options there. That is how I did mine. Call between 9am and 6pm monday through friday. Phone number is in my sig. I wish I had pictures of mine, but I don't. It is simple to do. Once you put the decal down, then you can drill the appropriate holes, then reinstall the test button, LED, and the on/off/variable output knob.

 

[Dreamcar86]

give us a call and we will send you a decal. You can put it on the bezel where the defroster switch goes. That is if your car does not have the options there. That is how I did mine. Call between 9am and 6pm monday through friday. Phone number is in my sig. I wish I had pictures of mine, but I don't. It is simple to do. Once you put the decal down, then you can drill the appropriate holes, then reinstall the test button, LED, and the on/off/variable output knob.

Please post a pic. I am liking the sounds of this. I will remove my rear defogger switch and mount it there.

 

[Razor]

This is how I do the TTA panels. Sticker over plastic.. then punch three holes. The decals are available in vertical and horizontal. This is the horizontal version.

HTH

http://www.turbobuick.com/forums/turbo-trans-am-tech/213918-razor-alky-kit-tta.html

 

[Dreamcar86]

This is how I do the TTA panels. Sticker over plastic.. then punch three holes. The decals are available in vertical and horizontal. This is the horizontal version.

HTH

http://www.turbobuick.com/forums/turbo-trans-am-tech/213918-razor-alky-kit-tta.html

That looks good! I will call and get one of those stickers from you.

 

[Razor]

That looks good! I will call and get one of those stickers from you.

PM or email me your address. Let me know if you want vert or horiz

J.

 

[Dreamcar86]

Once again Julio takes care of his customers!!

PM or email me your address. Let me know if you want vert or horiz

J.

Julio,

Just wanted to let you know that I received your decal in the mail. I will post pics when I finish mounting it in the dash.

Thank you for the on-going great customer service!

Shane