MSBC Boost Sensor

[tom j]

My broke where the hose attaches to so I need one.

 

[norbs]

Those are hard to find, but here is the documentation on it. Try a HVAC place...or exile turbo. You can take the silicone out and try and crazy glue it back on also.

 

[DR BOOST]

the newer style has a brass nipple on it. i was quoted about 250 for a new map and a flash update to use it

 

[tom j]

the newer style has a brass nipple on it. i was quoted about 250 for a new map and a flash update to use it

Not cheap!

 

[tom j]

Those are hard to find, but here is the documentation on it. Try a HVAC place...or exile turbo. You can take the silicone out and try and crazy glue it back on also.

Do you know the part number for the one with the blue silicone? Also is it a 0-60psi?

 

[norbs]

I am not sure anymore, I sold mine. If you peel back the silicone there should be a part number on the sensor. I would assume it is 0-100psia. Theres a little board on the end where the wires are soldered so be careful not to break it.

 

[tom j]

Whats the point of the silicone?

 

[norbs]

Keep the moisture and corrosion out, I guess