You can type here any text you want

MSD 50's

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
Interested in the injectors. How many miles? Do you have a chip for them? What is your bottom dollar? Thanks, DON
 
not to hi-jack your thread, but I have a couple chips forsale for 50lb injectors. PM me if you decide to get his injectors.

Thanks
 
I have a sale pending at the moment, but I will let you know. I do have an extender chip available.
 
Man you must be running 10.90's if you need to go bigger already. Too many fast buicks around here.
 
Originally posted by SPOT MY 6
Man you must be running 10.90's if you need to go bigger already. Too many fast buicks around here.

just incase I want to go crazy later, kind of like welding the axle tubes. ;) :D
 
Originally posted by SPOT MY 6
Man you must be running 10.90's if you need to go bigger already. Too many fast buicks around here.

Ain't no fast Buicks in Chicago; everybody knows that.
 
pace ta and gnguy you both have mail. original buyer backed out on the deal.
 
I'll go $75 shipped on the chip. :)

BYL57A1F
B= data stream
Y= old high speed, works with Scanmaster 2.0 and 2.1
L= Injector 50 MSD
5= Octane: 98oct. 23/21* (low gear 23* timing, high gear 21*) "alky chip"
7= Wastegate setting: 100/95--- Typical race setting, about 19 to 20 psi (stock wastegate)
A= idle/rev limit= 750/6000 Stock cam
1= theft prevention: anti-theft + convenience/valet mode
F= Revision: Current software/features revision is "F"
Theft Prevention
1 - anti-theft + convenience/valet mode
Convenience: The user can shut off the anti-theft temporarily and the car will drive normally or it can be activated when needed.
Programmable valet: Can disable anti-theft temporarily, and prevent WOT operation to stop "valet joy riding".

I copied that info from: http://www.fullthrottlespeed.com/Dy...52755YHVCM25-EVEREST-7&Cc=&ic=050EXTCHIP&tpc=
 
Originally posted by DCVING 6
I'll go $75 shipped on the chip. :)

BYL57A1F
B= data stream
Y= old high speed, works with Scanmaster 2.0 and 2.1
L= Injector 50 MSD
5= Octane: 98oct. 23/21* (low gear 23* timing, high gear 21*) "alky chip"
7= Wastegate setting: 100/95--- Typical race setting, about 19 to 20 psi (stock wastegate)
A= idle/rev limit= 750/6000 Stock cam
1= theft prevention: anti-theft + convenience/valet mode
F= Revision: Current software/features revision is "F"
Theft Prevention
1 - anti-theft + convenience/valet mode
Convenience: The user can shut off the anti-theft temporarily and the car will drive normally or it can be activated when needed.
Programmable valet: Can disable anti-theft temporarily, and prevent WOT operation to stop "valet joy riding".

I copied that info from: http://www.fullthrottlespeed.com/Dy...52755YHVCM25-EVEREST-7&Cc=&ic=050EXTCHIP&tpc=

gotta pass, i dont have alky
 
FWIW, it isn't just used for alky. I did not plan on using it right away ethier. The ignition timing on the chip is very effective when used with alky.
 
Back
Top