Need help fixing wire that came out of harness

[Brocks GN]

What is the easiest way to put the wire back into this location (see picture)? This is the wire used for the rear running lights, I tried just pushing it back in but it will not stay and do not want to drive the car at night. BTW I hate electrical
Any help would be greatly appricated!

 

[chopped39]

Go to Auto Zone and buy the terminal removal tool then remove it and recrimp it. good luck

 

[Brocks GN]

Ok I am assuming it is somthing like this http://shop.advanceautoparts.com/we...hexton_21298910-p?searchTerm=terminal+remover
Excuse my ignorance but how does the removal tool work, do I push it into the terminal area or?

 

[David65]

You might ask GNVenom on here how to release those terminals. He shows a couple of extraction tools on his website http://www.casperselectronics.com but neither look like the correct tool for that Packard connector. Or, you might try your local GM dealer. Most have kits of terminals and connector shells and the tools to extract/crimp the terminals. They probably could remove the terminal and crimp on a new one for not too much $.

David

 

[Brocks GN]

Thanks David

Posted from the TurboBuick.Com mobile app

 

[garyk1970]

if that connector will seperate, solder wire in plug..