Need help with Gen6 Harness...

[19TTA89]

Where does this Harness go??? I just got this setup and this was the only harness that came with it...Not really sure where it plugs into,And where does the Red wire splice into???

Also,Is there any other harnesses needed??And what sensors are no longer used with this setup??

This came off a car that was very close to mine combo wise...So Im hoping that I wont have to do much with it,Because I have no clue what Im doing with it yet.....

If anyone has any 55lb injector programs they would like to donate...It would be greatly appreciated...

Thanks,Shawn Click here to see the Harness!!!!

 

[buickjeff]

Shawn ,

The two black connectors go to your
tps sensor , just unplug your tps , connect the female connector on the harness and then plug the male connector from that harness back to your tps - the orange 3 wire connector
plugs into the 3 bar map sensor
the loose orange wire connects to the pink and black
wire in your underhood harness - i belive that is the
right wire
ill check into what wire the loose orange wire goes into
or if someone else on the board knows i am sure they will
correct me.
hope that helps or gets someone to answer your question better
then me

 

[19TTA89]

Any word on if the loose orange wire connects to the pink and Black wire in the maf plug.....Or the Grey and Red....

Thanks,Shawn